View source for MSS60 Error: 2B29, P16B1, P16B7, P16B8, P16C1

__FORCETOC__

====2B29 - P16B1====

{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B29 - P16B1
|-
|'''Fault text'''
|Moment manager monitoring
|-
|'''Fault description'''
|Control Module Self-Test, Idle Air Control System Integrated Component Plausibility
|-
|'''Condition for fault identification'''
|Test condition: I-component greater than 70 Nm (K_MD_SK_LLR_MAX)
|-
|
|Terminal condition: Terminal 15
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Clear fault memory
|-
|
|2. Update DME
|-
|
|3. Replace DME
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}


====2B29 - P16B7====

{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B29 - P16B7
|-
|'''Fault text'''
|Moment manager monitoring
|-
|'''Fault description'''
|Control Module Self-Test, Clutch Torque Monitoring Maximum Value Plausibility
|-
|'''Condition for fault identification'''
|Test condition: Specified torques greater than 620 Nm (K_MD_SK_IND_MAX)
|-
|
|Terminal condition: Terminal 15
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Clear fault memory
|-
|
|2. Update DME
|-
|
|3. Replace DME
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}


====2B29 - P16B8====

{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B29 - P16B8
|-
|'''Fault text'''
|Moment manager monitoring
|-
|'''Fault description'''
|Control Module Self-Test, Clutch Torque Monitoring Minimum Value Plausibility
|-
|'''Condition for fault identification'''
|Test condition: Minimum torque greater than 70 Nm (K_MD_SK_MAX_MDMIN)
|-
|
|Terminal condition: Terminal 15
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Clear fault memory
|-
|
|2. Update DME
|-
|
|3. Replace DME
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}


====2B29 - P16C1====

{| class = "diyTable ecuFault"
|-
|'''Information saved in'''
|DME
|-
|'''Fault code'''
|2B29 - P16C1
|-
|'''Fault text'''
|Moment manager monitoring
|-
|'''Fault description'''
|Control Module Self-Test, Torque Monitoring Current Indicated Value Plausibility
|-
|'''Condition for fault identification'''
|Test condition: Difference too large
|-
|
|Terminal condition: Terminal 15
|-
|
|Voltage condition: None
|-
|'''Condition for fault memory entry'''
|10 ms
|-
|'''Action in service'''
|1. Check load monitoring
|-
|
|2. Clear fault memory
|-
|
|3. Update DME
|-
|
|4. Replace DME
|-
|'''Fault effect and breakdown warning'''
|CC message
|-
|
|Engine speed limited
|-
|
|Reduced power
|-
|
|MIL after engine runs 2x
|-
|'''Driver information'''
|Warning light: MIL, EML, CC message, backup program
|-
|'''Service instruction'''
|None
|}