Difference between revisions of "MSS60 Error: 2B0D, P152C, P152D, P152E, P152F"
From Wiki-DIY
(Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |2B0D - P152C |- |'''Fault text''' |Idle actuator monitoring, bank 1 |- |'''Fault description''' |Idle-Speed Co...") (Tag: Visual edit) |
|||
Line 1: | Line 1: | ||
− | + | __FORCETOC__ | |
− | + | ||
− | | | + | |
+ | ==== '''2B0D - P152C''' ==== | ||
+ | {| class = "diyTable ecuFault" | ||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
Line 47: | Line 49: | ||
− | + | ==== '''2B0D - P152D''' ==== | |
− | + | {| class = "diyTable ecuFault" | |
− | |||
− | {| | ||
− | |||
− | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
Line 98: | Line 96: | ||
− | + | ==== '''2B0D - P152E''' ==== | |
− | + | {| class = "diyTable ecuFault" | |
− | |||
− | {| | ||
− | |||
− | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
Line 149: | Line 143: | ||
− | + | ==== '''2B0D - P152F''' ==== | |
− | + | {| class = "diyTable ecuFault" | |
− | |||
− | {| | ||
− | |||
− | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' |
Latest revision as of 13:49, 3 February 2015
2B0D - P152C
Information saved in | DME |
Fault code | 2B0D - P152C |
Fault text | Idle actuator monitoring, bank 1 |
Fault description | Idle-Speed Control Valve Monitoring Dissimilar Desired Values (Bank 1) |
Condition for fault identification | Test condition: Difference too large |
Terminal condition: TERM87 | |
Voltage condition: Battery voltage > 6.8V (k_egas_can_ed_ub_min) | |
Condition for fault memory entry | 300 ms |
Action in service | 1. Clear fault memory, LLS idle actuator system test |
2. Check LLS1 voltage supply | |
3. Replace LLS1 | |
Fault effect and breakdown warning | DSC lamp / CC message / engine speed limited to 5000 rpm / reduced power / engine start may be possible only with use of accelerator pedal |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |
2B0D - P152D
Information saved in | DME |
Fault code | 2B0D - P152D |
Fault text | Idle actuator monitoring, bank 1 |
Fault description | Idle-Speed Control Valve Monitoring Incorrect Actual Value (Bank 1) |
Condition for fault identification | Test condition: Error detection received via CAN |
Terminal condition: TERM87 | |
Voltage condition: Battery voltage > 6.8V (k_egas_can_ed_ub_min) | |
Condition for fault memory entry | 100 ms |
Action in service | 1. Clear fault memory, LLS idle actuator system test |
2. Check LLS1 voltage supply | |
3. Replace LLS1 | |
Fault effect and breakdown warning | DSC lamp / CC message / engine speed limited to 5000 rpm / reduced power / engine start may be possible only with use of accelerator pedal |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |
2B0D - P152E
Information saved in | DME |
Fault code | 2B0D - P152E |
Fault text | Idle actuator monitoring, bank 1 |
Fault description | Idle-Speed Control Valve Monitoring Actual Value / Desired Value Correlation (Bank 1) |
Condition for fault identification | Test condition: Difference too large |
Terminal condition: TERM87 | |
Voltage condition: Battery voltage > 6.8V (k_egas_can_ed_ub_min) | |
Condition for fault memory entry | 350 ms |
Action in service | 1. Clear fault memory, LLS idle actuator system test |
2. Check LLS1 voltage supply | |
3. Replace LLS1 | |
Fault effect and breakdown warning | DSC lamp / CC message / engine speed limited to 5000 rpm / reduced power / engine start may be possible only with use of accelerator pedal |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |
2B0D - P152F
Information saved in | DME |
Fault code | 2B0D - P152F |
Fault text | Idle actuator monitoring, bank 1 |
Fault description | Idle-Speed Control Valve Monitoring Reset Error (Bank 1) |
Condition for fault identification | Test condition: Not identical for too long |
Terminal condition: TERM87 | |
Voltage condition: Battery voltage > 6.8V (k_egas_can_ed_ub_min) | |
Condition for fault memory entry | 250 ms |
Action in service | 1. Clear fault memory, LLS idle actuator system test |
2. Check LLS1 voltage supply | |
3. Replace LLS1 | |
Fault effect and breakdown warning | DSC lamp / CC message / engine speed limited to 5000 rpm / reduced power / engine start may be possible only with use of accelerator pedal |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |