Difference between revisions of "MSS60 Error: 27BB, P0174, P0175, P2079, P2080"
From Wiki-DIY
(Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |27BB - P0174 |- |'''Fault text''' |Fuel system, lambda/charge plausibility, bank 2 |- |'''Fault description'''...") (Tag: Visual edit) |
(No difference)
|
Revision as of 13:31, 3 February 2015
Information saved in | DME |
Fault code | 27BB - P0174 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Lean (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |
Information saved in | DME |
Fault code | 27BB - P0174 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Lean (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |
Information saved in | DME |
Fault code | 27BB - P0175 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Rich (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |
Information saved in | DME |
Fault code | 27BB - P0175 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Rich (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |
Information saved in | DME |
Fault code | 27BB - P2179 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Lean Off Idle (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |
Information saved in | DME |
Fault code | 27BB - P2179 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Lean Off Idle (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |
Information saved in | DME |
Fault code | 27BB - P2180 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Rich Off Idle (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |
Information saved in | DME |
Fault code | 27BB - P2180 |
Fault text | Fuel system, lambda/charge plausibility, bank 2 |
Fault description | System Too Rich Off Idle (Bank 2) |
Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
Terminal condition: Engine running | |
Voltage condition: None | |
Condition for fault memory entry | 10000 ms |
Action in service | 1. Check the fuel system for leaks |
2. System test routine | |
3. HFM and charge path must be flawless. | |
4. Defective fuel pressure sensor | |
Fault effect and breakdown warning | MIL on after engine runs 2x |
Driver information | Warning light: MIL |
Service instruction | None |