Difference between revisions of "MSS60 Error: 27BB, P0174, P0175, P2079, P2080"
From Wiki-DIY
(Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |27BB - P0174 |- |'''Fault text''' |Fuel system, lambda/charge plausibility, bank 2 |- |'''Fault description'''...") (Tag: Visual edit) |
|||
| Line 1: | Line 1: | ||
| − | + | __FORCETOC__ | |
| − | + | ||
| − | | | + | |
| + | ==== '''27BB - P0174'' ==== | ||
| + | {| class = "diyTable ecuFault" | ||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 50: | Line 52: | ||
| − | + | ==== '''27BB - P0174'' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 104: | Line 102: | ||
| − | + | ==== '''27BB - P0175'' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 158: | Line 152: | ||
| − | + | ==== '''27BB - P0175'' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 212: | Line 202: | ||
| − | + | ==== '''27BB - P2179'' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 266: | Line 252: | ||
| − | + | ==== '''27BB - P2179'' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 320: | Line 302: | ||
| − | + | ==== '''27BB - P2180'' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 374: | Line 352: | ||
| − | + | ==== '''27BB - P2180'' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
Revision as of 13:33, 3 February 2015
Contents
'27BB - P0174
| Information saved in | DME |
| Fault code | 27BB - P0174 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Lean (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
'27BB - P0174
| Information saved in | DME |
| Fault code | 27BB - P0174 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Lean (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
'27BB - P0175
| Information saved in | DME |
| Fault code | 27BB - P0175 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Rich (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
'27BB - P0175
| Information saved in | DME |
| Fault code | 27BB - P0175 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Rich (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
'27BB - P2179
| Information saved in | DME |
| Fault code | 27BB - P2179 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Lean Off Idle (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
'27BB - P2179
| Information saved in | DME |
| Fault code | 27BB - P2179 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Lean Off Idle (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
'27BB - P2180
| Information saved in | DME |
| Fault code | 27BB - P2180 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Rich Off Idle (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
'27BB - P2180
| Information saved in | DME |
| Fault code | 27BB - P2180 |
| Fault text | Fuel system, lambda/charge plausibility, bank 2 |
| Fault description | System Too Rich Off Idle (Bank 2) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: None | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
