Difference between revisions of "MSS60 Error: 27BA, P0171, P0172, P0177, P0178"
From Wiki-DIY
(Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |27BA - P0171 |- |'''Fault text''' |Fuel system, lambda/charge plausibility, bank 1 |- |'''Fault description'''...") (Tag: Visual edit) |
|||
| Line 1: | Line 1: | ||
| − | + | __FORCETOC__ | |
| − | + | ||
| − | | | + | |
| + | ==== '''27BA - P0171''' ==== | ||
| + | {| class = "diyTable ecuFault" | ||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 50: | Line 52: | ||
| − | + | ==== '''27BA - P0171''' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 104: | Line 102: | ||
| − | + | ==== '''27BA - P2177''' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 157: | Line 152: | ||
| − | + | ==== '''27BA - P2177''' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 211: | Line 202: | ||
| − | + | ==== '''27BA - P0172''' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 264: | Line 252: | ||
| − | + | ==== '''27BA - P0172''' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 318: | Line 302: | ||
| − | + | ==== '''27BA - P2178''' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 372: | Line 352: | ||
| − | + | ==== '''27BA - P2178''' ==== | |
| − | + | {| class = "diyTable ecuFault" | |
| − | |||
| − | {| | ||
| − | |||
| − | |||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
Latest revision as of 13:31, 3 February 2015
Contents
27BA - P0171
| Information saved in | DME |
| Fault code | 27BA - P0171 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Lean (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
27BA - P0171
| Information saved in | DME |
| Fault code | 27BA - P0171 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Lean (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
27BA - P2177
| Information saved in | DME |
| Fault code | 27BA - P2177 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Lean Off Idle (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
27BA - P2177
| Information saved in | DME |
| Fault code | 27BA - P2177 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Lean Off Idle (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
27BA - P0172
| Information saved in | DME |
| Fault code | 27BA - P0172 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Rich (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
27BA - P0172
| Information saved in | DME |
| Fault code | 27BA - P0172 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Rich (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
27BA - P2178
| Information saved in | DME |
| Fault code | 27BA - P2178 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Rich Off Idle (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
27BA - P2178
| Information saved in | DME |
| Fault code | 27BA - P2178 |
| Fault text | Fuel system, lambda/charge plausibility, bank 1 |
| Fault description | System Too Rich Off Idle (Bank 1) |
| Condition for fault identification | Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_LAM_DELTA_ML_MAX * expansion factor (KL_FPLAU_OBD_LAM_CSS_F) |
| Terminal condition: Engine running | |
| Voltage condition: none | |
| Condition for fault memory entry | 10000 ms |
| Action in service | 1. Check the fuel system for leaks |
| 2. System test routine | |
| 3. HFM and charge path must be flawless. | |
| 4. Defective fuel pressure sensor | |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | None |
