|
|
Line 1: |
Line 1: |
− | {|
| + | asdf |
− | |
| |
− | |
| |
− | |-
| |
− | |'''Information saved in'''
| |
− | |DME
| |
− | |-
| |
− | |'''Fault code'''
| |
− | |27AA - P0106
| |
− | |-
| |
− | |'''Fault text'''
| |
− | |Charge plausibility, diagnosis hot - bank 1
| |
− | |-
| |
− | |'''Fault description'''
| |
− | |Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance
| |
− | |-
| |
− | |'''Condition for fault identification'''
| |
− | |Test condition: Deviation from mean value (depending on psau, lam, aq) in percent is determined and compared with the max. deviation (in relation to rpm/load factor) KF_FPLAU_OBD_PSAU_DELTA_ML_MAX * expansion factors (K_FPLAU_OBD_TE_F, KL_FPLAU_PSAU_PUMG_F)
| |
− | |-
| |
− | |
| |
− | |Terminal condition: Engine running
| |
− | |-
| |
− | |
| |
− | |Voltage condition: None
| |
− | |-
| |
− | |'''Condition for fault memory entry'''
| |
− | |10000 ms
| |
− | |-
| |
− | |'''Action in service'''
| |
− | |1. Check induction system B1 for leaks
| |
− | |-
| |
− | |
| |
− | |2. Replace intake manifold pressure sensor
| |
− | |-
| |
− | |'''Fault effect and breakdown warning'''
| |
− | |MIL on after engine runs 2x
| |
− | |-
| |
− | |'''Driver information'''
| |
− | |Warning light: MIL
| |
− | |-
| |
− | |'''Service instruction'''
| |
− | |None
| |
− | |}
| |