MSS60 Error: 275A, P0358, P131C, P133A, P2321, P2322

From Wiki-DIY
Jump to: navigation, search


275A - P0358

Information saved in DME
Fault code 275A - P0358
Fault text Ignition cylinder 8, activation
Fault description Ignition Coil 'H' Primary Control Circuit/Open
Condition for fault identification Test condition: Current on PIN A_S_ICC too low with active ignition pulse
Terminal condition: TERM87
Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min)
Condition for fault memory entry 8 operating cycles
Action in service 1. Check plug and wiring harness at M ignition coil
2. Replace M ignition coil as indicated
Fault effect and breakdown warning CC message
Engine speed limited
Reduced power
Rough idle
Driver information Warning light: MIL, EML, CC message, backup program
Service instruction None


275A - P131C

Information saved in DME
Fault code 275A - P131C
Fault text Ignition cylinder 8, activation
Fault description Ionic Current Control Module Control Line Ignition Cylinder 8 Low
Condition for fault identification Test condition: Voltage at PIN A_S_ICC too low, ignition channel inactive
Terminal condition: TERM87
Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min)
Condition for fault memory entry 8 operating cycles
Action in service 1. Check plug and wiring harness at M ignition coil
2. Replace M ignition coil as indicated
3. If shorts to ground are entered for all cylinders check fuse for TERM87 power supply
Fault effect and breakdown warning CC message
Engine speed limited
Reduced power
Rough idle
Driver information Warning light: MIL, EML, CC message, backup program
Service instruction None


275A - P133A

Information saved in DME
Fault code 275A - P133A
Fault text Ignition cylinder 8, activation
Fault description Ionic Current Control Module Control Line Ignition Cylinder 8 High
Condition for fault identification Test condition: Current on PIN A_S_ICC too high with active ignition pulse
Terminal condition: TERM87
Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min)
Condition for fault memory entry 8 operating cycles
Action in service 1. Check plug and wiring harness at M ignition coil
2. Replace M ignition coil as indicated
Fault effect and breakdown warning CC message
Engine speed limited
Reduced power
Rough idle
Driver information Warning light: MIL, EML, CC message, backup program
Service instruction None


275A - P2321

Information saved in DME
Fault code 275A - P2321
Fault text Ignition cylinder 8, activation
Fault description Ignition Coil 'H' Primary Control Circuit Low
Condition for fault identification Test condition: Voltage at PIN A_S_ICC too low, ignition channel inactive
Terminal condition: TERM87
Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min)
Condition for fault memory entry 8 operating cycles
Action in service 1. Check plug and wiring harness at M ignition coil
2. Replace M ignition coil as indicated
3. If shorts to ground are entered for all cylinders check fuse for TERM87 power supply
Fault effect and breakdown warning CC message
Engine speed limited
Reduced power
Rough idle
Driver information Warning light: MIL, EML, CC message, backup program
Service instruction None


275A - P2322

Information saved in DME
Fault code 275A - P2322
Fault text Ignition cylinder 8, activation
Fault description Ignition Coil 'H' Primary Control Circuit High
Condition for fault identification Test condition: Current on PIN A_S_ICC too high with active ignition pulse
Terminal condition: TERM87
Voltage condition: Battery voltage > 9.8V (k_diag_tr_ub_min)
Condition for fault memory entry 8 operating cycles
Action in service 1. Check plug and wiring harness at M ignition coil
2. Replace M ignition coil as indicated
Fault effect and breakdown warning CC message
Engine speed limited
Reduced power
Rough idle
Driver information Warning light: MIL, EML, CC message, backup program
Service instruction None