Difference between revisions of "MSS60 Error: 2743, P0155"

From Wiki-DIY
Jump to: navigation, search
(Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |2743 - P0155 |- |'''Fault text''' |Oxygen sensor heater resistance diagnosis before cat. converter, bank 2 |-...")
 
 
Line 1: Line 1:
{|
+
====2743 - P0155====
|
+
{| class = "diyTable ecuFault"
|
 
 
|-
 
|-
 
|'''Information saved in'''
 
|'''Information saved in'''

Latest revision as of 13:40, 12 January 2015

2743 - P0155

Information saved in DME
Fault code 2743 - P0155
Fault text Oxygen sensor heater resistance diagnosis before cat. converter, bank 2
Fault description O2 Sensor Heater Circuit (Bank 2 Sensor 1)
Condition for fault identification Test condition: The upper or lower threshold of the resistance values has been violated, above/below 6.0 ohms (K_LSHVK_DIAG_RU) 14.5 ohms (K_LSHVK_DIAG_RO)
Terminal condition: Engine running
Voltage condition: Battery voltage > 9V (k_ed_ubmin)
Condition for fault memory entry min. K_LSHVK_DIAG_ANZ_MESS (100) valid calculations of heater resistance - roughly.1.5 sec.
Action in service 1. DME software release must be more recent than 07-06-510, fix incorporated since 07-09-521
2. Check plug, wiring harness on pre-cat oxygen sensor LSVK B2,
3. If OK, replace oxygen sensor
Fault effect and breakdown warning MIL lamp on after engine runs 2x /Small influence on drivability
Driver information Warning light: MIL
Service instruction None