Difference between revisions of "Engine Specs - S54 Connecting Rods"

From Wiki-DIY
Jump to: navigation, search
(Created page with "__FORCETOC__ == Rod Bolt Comparisons == === OEM Rod Bolts === ==== SPEC: OEM: Torque procedure ==== {| class = "diyTable bearingSpec" !Torque !Angle |- |20 Nm |130 degrees...")
 
(Replaced content with "__FORCETOC__ TBD")
 
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
  
== Rod Bolt Comparisons ==
+
TBD
=== OEM Rod Bolts ===
 
 
 
==== SPEC: OEM: Torque procedure ====
 
 
 
{| class = "diyTable bearingSpec"
 
!Torque
 
!Angle
 
|-
 
|20 Nm
 
|130 degrees
 
|-
 
|Remove
 
 
|-
 
|20 Nm
 
|130 degrees
 
|-
 
|Remove
 
 
|-
 
|20 Nm
 
|130 degrees
 
|}
 
<br>
 
Make sure you are starting with new rod bolts.  Factory rod bolts must be replaced once used.
 
# Lubricate rod bolt threads and connecting rod cap bore holes with appropriate thread lubricant.
 
# Torque to 20-Nm, then using a torque-angle gauge tighten another 130-degrees.
 
# Remove bolts.
 
# Repeat steps 1-3
 
# Repeat steps 1, 2.
 
<p></p>
 
 
 
====SPEC: OEM: Clamping Force====
 
* '''Clamping Force''':  Approximately 11000 pounds force.
 
<p></p>
 

Latest revision as of 13:22, 30 January 2016


TBD